Publicidad
Idiomas disponibles
Idiomas disponibles
1. Display
2. Wi-Fi function
3. Temperature / time down
4. 24 hours timer off / Child lock
5. Heating setting
6. Temperature / time up
7. On / Off
1. To prevent damage, place the radiator upside down on a soft surface (for example a carpet)
2. Fix wheels on two plates with cap nuts. Wheels should be installed between the two first
and two last fins.
3. Insert the U-shaped hook into the wheels plate and fix it on the radiator by wing nuts.
4. Turn the heater upright. Wait one minute before connecting the heater to power outlet.
1. Press on/off switch and press Power button to start the setting.
2. Press + or - to adjust the target temperature, 5-35 ºC.
3. Press ||| to adjust the heating position (I, II or III).
4. Press Timer button to set the 24 hours timer off, "0" means the timer function is off. Press
+ or - to set desired timer. The indicator light will light up when this function is activated.
5. Press Timer button for 3 seconds, the screen will be locked and the light will be dim. To
unlock the heater, press Timer button for 3 seconds again.
6. The heater has a heating boost function. The heater will continuously work for 12 hours,
while the temperature sensor does not work. In this mode, the indicator
(The function needs to be set on the app only)
7. When the heater is working, the
8. For all the operation, the indicator light will stop twinkle when the user doesn't operate
the appliance for 10 seconds, it will work based on the setting before the twinkle stops.
9. The light of the screen will be dim after stopping the operation for 30 seconds.
CONTROL PANEL
1
2
3
4
5
ASSEMBLY INSTRUCTIONS
OPERATION
will be light up.
6
7
will be light up.
E NGLI SH
7
Publicidad
