Publicidad
Idiomas disponibles
Idiomas disponibles
Children have died or been seriously injured when gates are not securely installed.
• ALWAYS install and use gate as directed using all required parts.
• NEVER use with a child or pet able to climb over, dislodge or open the gate.
• NEVER leave child unattended.
• NEVER use to keep child away from pool.
• You MUST install Mounting Caps to keep gate in place. Without Mounting Caps, child can push out and escape.
• To prevent falls, NEVER use at the top of the stairs.
• Intended for use ONLY with children 6 months through 24 months.
• To ensure proper fit, use ONLY in openings between 76 – 82.5 cm (30 – 32.5 in) and 89 – 95 cm (35 – 37.5 in) wide.
• To help prevent entrapment, DO NOT allow space between bottom of gate and floor to exceed 7.62 cm (3 in).
• Use ONLY with locking/latching mechanism securely engaged.
• To help prevent gate from dislodging, make sure all four Adjustment Bumpers fit securely in the Mounting Caps against wall or doorway
opening.
• To prevent falls, DO NOT attempt to step over gate.
• STOP using gate if parts are missing or if gate becomes damaged, broken, or disassembled.
• Use in doorways with wooden frames. When installing against drywall, ensure mounting surface is reinforced with a wall stud to help
prevent damage.
• Periodically check all fasteners to be sure they are tight and secure to prevent gate from dislodging.
• Pressure-mounted gates may dislodge if significant pressure is placed against them. Avoid applying significant pressure or weight.
• This gate will NOT necessarily prevent all accidents.
• For indoor use ONLY.
• STRANGULATION HAZARD – Pets can force themselves into very small openings. Use this gate only with pets whose head or
body WILL NOT fit into openings in the gate, between the gate and the floor, or between the gate and the wall.
• Ensure gaps between the safety gate and the side of the door frame are approximately equal. NEVER exceed 5 cm (2 in).
• Ensure child is kept away from the gate when closing or opening it to prevent injury to the child, such as from pinching.
Important Information
IMPORTANT: Failure to follow installation instructions could result in serious injury to your child. Read these instructions
completely and keep for future reference.
Parts List
If you are missing parts, do not use gate. Visit us at www.evenflo.com, or call Evenflo ParentLink at 1-800-233-5921 (U.S.A.),
1-937-773-3971 (Canada), or 800-706-1200 (Mexico) to order replacement parts.
Extension
Wrench
Metal Pressure Gate
For openings 76 cm (30 in) to 82.5 cm (32.5 in)
Registration Information: Please register this product so we can reach you if there is a safety alert or recall. We will not sell,
rent, or share your personal information. To register your product, please complete and mail the card that came with it or visit our
www.evenflo.com/registerproduct
on-line registration at
For future reference, record the Model Number and Date of Manufacture below.
Model Number:
www.evenflo.com • USA: 1-800-233-5921, 8 AM – 5 PM EST
2
• Canada: 1-937-773-3971 • México: 800-706-1200
WARNING
Adjustment
Adhesive
Extension
Bumper (4)
Pins (2)
Mounting Pads (4)
Metal Pressure Gate with Extension
For openings 89 cm (35 in) to 95 cm (37.5 in)
Date of Manufacture:
DO NOT remove YELLOW TAG or PLASTIC
TIES at this time or serious injury may result.
1. Measure and record the width of the opening where you will use
the gate.
2. If the opening width is 89 – 95 cm (35 – 37.5 in), install extension
on the gate frame
, as shown. Make sure the plastic caps on the
B
extension
A
and the gate
MUST touch each other to securely install the extension.
NOTE: Extension can be installed on either side of gate.
3. Push four Adjustment Bumpers
frame
B
or the gate extension.
NOTE: Make sure the Adjustment Bumpers are pushed all the way
in.
Mounting
Caps (4)
4. Position gate
B
on floor in center of opening, making sure that it is
straight up and down (90º to the floor).
NOTE: Rubber ends of adjustment bumpers (
mounting surfaces.
WARNING
A
B
touch each other. The plastic caps
onto the corners of the gate
C
D
,
E
) may mark some
Assemble Gate
Extension
Pin
B
A
B
A
B
C
B
D
D
E
E
3
Publicidad
