Create CLIPPER EASY Manual Del Usuario página 8

1. Add the oil into the cutter head before use. The product body may be a little hot when
using or charging. But it will not affect its performance.
2. Add one drip to each of the 5 circles showed in the picture.
3. Add the oil to the positions as directed by the arrow.
4. Don't use petrol, alcohol or thinner to clean the product. Otherwise, the product colour
may change.
5. Use diluted soap water to clean the product.
6. Don't charge the product if the room temperature is higher than 40 ºC or lower than 0 ºC.
7. Keep it out of the reach of children to avoid cuts by the clipper blade or swallowing its
small parts.
• Choose the suitable size you will need.
• Match it with the blade at the same level and then assemble.
• Take it out by pushing one side of the comb using your thumb.
This product can be charged on the charging base or using the charging adapter directly.
• Put the adaptor connector terminal into the base.
• Make sure the product is in the position of Power Off and then put it into the charging base.
The LED light will show a fixed red color.
• Charging time is around 4 hours.
• When the charging is finished, the LED light will show a flashing white color.
• If using charging base, please connect the adaptor with the base and then plug into the
socket. (the blue charging indicator will be working on the base.) And then put the product
into the base to start the charging.
Warning! Don't take the adaptor out from the socket with wet hands to avoid the risk of
electric shock.
8
E NGL I SH
ADDING OIL
CUTTING HEIGHT ADJUSTMENT
CHARGING METHOD