Publicidad
Idiomas disponibles
Idiomas disponibles
Note : When the screen displays ''Add'' and if there is no action for 10 minutes, the
program stops and the screen returns to display ''START/STOP''. You will need to re-select
to restart cooking.
4. To activate drawer 2, press '2'.
5. Press the second desired cooking mode and adjust timing and temperature if different to
the pre-set settings (by pressing + and -).
6. Place your second food in the drawer 2 (right drawer). Slide the drawer back into the appliance.
7. Press
in order to get the two foods ready at the same time. If the two cooking modes
selected have different cooking times, 'HOLD' appears on the screen for the shortest
cooking mode (for the food which needs less time to cook). It means the appliance delays
the cooking launch in order to have the two types of food ready at the same time.
8. Press
to begin cooking.
9. The appliance beeps when the food is ready, at the same time.
10. When the food is cooked, take out the drawer. To remove food, use a pair of tongs to lift the
food out of the drawer.
Caution : After hot frying, the grids and the food are very hot.
Note : During cooking, if you remove one of the drawers and you do not slide it back within
5 minutes, this drawer panel will display 'OFF'. The other drawer keeps running, but it ends
'SYNC' program.
USING ONLY ONE DRAWER OF THE APPLIANCE
1. Press
to switch on the appliance.
2. Fries mode is displayed as default for drawer 1 while OFF is displayed on the screen for drawer 2.
3. Any drawer can be activated by pressing '1' or '2' button. The other drawer remains OFF (To
cancel the selection, press again '1' or '2' button).
4. To begin cooking, you can select between the preset cooking mode or the manual settings.
a. If choosing preset cooking mode:
• Select the desired cooking mode by pressing the icon corresponding on the touchscreen
panel (these modes are described in detail in the "Cooking guide" section).
• Confirm the cooking mode by pressing the
• Cooking starts. The remaining cooking time is displayed on the screen.
b. If choosing manual settings:
• Press MANUAL mode.
• Adjust the temperature
thermostat varies from 40-200°C.
• Then set the desired cooking time by pressing the
set for between 0 and 60 minutes.
• Press the
Cooking starts. The remaining cooking time is displayed on the screen.
5. Excess oil from the food is collected in the bottom of the drawer.
6. Some food will require shaking halfway through the cooking time for optimal cooking results. (see
section 'Cooking Guide'). To shake the food, pull the drawer out of the appliance by the handle
and shake it. Then slide the drawer back into the appliance and the cooking restarts automatically.
During Fries cooking mode, this pictogram flashes half way through cooking. It
indicates the need to shake the fries for even cooking and browning.
*depending on model
with the
button to begin cooking with the selected temperature and time settings.
button. This will launch the cooking process.
and
buttons on the digital screen. The
and
5
buttons. The timer can be
EN
Publicidad
