RJRoyal Living Big Jack 2.0 Instrucciones De Montaje página 2

oil every fortnight for protection against corrosion damage. The application of oil creates a protector between the air
and the steel. If the steel plate comes into contact with air, the plate will rust. Rust can eventually be removed by
making shavings now. royal living is not responsible for poor maintenance of plancha, especially the consequences
of not following maintenance rules. Any corrosion must be handled and removed by the customer.
2. Before the first grilling, plancha needs to be decreased from the factory oil coating. First, you need to heat
plancha. Then drizzle with vegetable oil and allow the it to mix well with the factory oil. Finally, you can wipe off the
factory oil with a cloth, clean the grill pan, add fresh vegetable oil and start grilling. Please be careful not to get
burned during the cleaning process.
Assembly Instruction:
Tools required: Allen Key included.
NO. Parts
A Plancha
B Wok Ring
C Fire Bowl
D Log Grate
E Side Panel
F Top Panel
G Bottom Panel
H Frame
I Handle
K Wheels (2 with brakes)
T Bolts (M6*15 mm)
W Rain Cover
X Allen Key
Z Poker
1. Assemble 1*Frame (H) on 2*Side Panel (E) by using 2*Bolts (T). Please assemble bolts in middle holes on 2* Side
Panel (E) first. Then repeat same step for assembling another Frame (H). Make sure all bolts are not tightened at
this step.
2. Assemble Top Panel (F) on top holes of 2*Side Panel (E) by using 4*Bolts (T). Please make sure all bolts are not
tightened at this step.
3. Assemble Handle (I) on 1*Side Panel (E) by using 4*Bolts (T).
Qty
1
1
1
1
2
1
1
2
1
4
36
1
1
1