EINHELL PICOBELLA 18/90 Manual De Instrucciones Original página 18

3. Proper use
The machine is designed solely for the damp
brushing (cleaning) of surfaces in private outdoor
and indoor areas. The surfaces must be suitable
for being brushed (cleaned) using the accesso-
ries supplied.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Voltage ....................................................18 V d.c.
Speed n₀ ......................................... 190/350 rpm
Protection class .................................................III
Protection .....................................................IPX4
Weight ..................................................... 1,55 kg
Important!
The equipment is supplied without batteries and
without a charger and is allowed to be used only
with the lithium-ion batteries of the Power X-
Change series!
The lithium-ion batteries of the Power X-Change
series are allowed to be charged only with the
Power X charger.
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 62841.
Sound pressure level L
Uncertainty K : ............................................ 3 dB
pA
Sound power level L
WA
Uncertainty K : ........................................... 3 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Anl_Picobella_18_90_SPK13.indb 18 Anl_Picobella_18_90_SPK13.indb 18
: .................... 67,2 dB(A)
pA
: ........................ 75,2 dB(A)
GB
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 62841.
Handle
Vibration emission value a
K uncertainty = 1.5 m/s
The stated vibration emission levels and stated
noise emission values were measured in ac-
cordance with a set of standardized criteria and
can be used to compare one power tool with
another.
The stated vibration emission levels and stated
noise emission values can also be used to make
an initial assessment of exposure.
Warning:
The vibration and noise emission levels may vary
from the level specifi ed during actual use, depen-
ding on the way in which the power tool is used,
especially the type of workpiece it is used for.
Limit the operating time!
All stages of the operating cycle must be conside-
red (for example, times in which the electric tools
are switched off and times in which the tool is
switched on but operates without load).
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
•
Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
•
Injury and damage to property caused by
flying parts.
- 18 -
≤ 2,5 m/s
2
h
2
19.09.2023 15:38:46 19.09.2023 15:38:46