If you operate as described in this Manual, but the
equipment does not run properly, please contact a technician or
your local service center
Read and follow the considerations as follows when connecting
and using the equipment:
• When the equipment is not used for a long time, its power plug
should be disconnected.
• When cleaning the equipment with a slightly wet cloth,
disconnect the power plug of the equipment. When the power is
turned off, the dry cloth can be used to wipe the screen. However,
do not use alcohol, solvents or ammonia liquids.
• If you operate as described in this Manual, but the equipment
does not run properly, please contact a technician.
• Only professional maintenance personnel can open the casing
cover.
• Do not expose the equipment to direct sunlight and keep it away
from the stove or any other heat source.
• Remove any articles that may fall into the vent holes or interfere
with the normal heat dissipation of electronic devices of the
equipment.
• Do not block the vent holes on the casing.
• Keep the equipment dry. To avoid electric shock, please do not
let it suffer from rain or damp.
• If the equipment is just turned off by disconnecting the
power cord or DC power supply cable, please wait 6s before
reconnecting the power cord or DC power supply cable, so as to
ensure the normal operation.
• To avoid electric shock or permanent damage, do not expose the
equipment to rain or damp.
• When placing equipment, make sure that the power plug and
socket are easily connected and disconnected.
• The disconnection device of this product is a power plug, and the
socket for the equipment should be installed near the equipment
and should be easily operated and not blocked by other objects.
5