Descargar Imprimir esta página

Qilive Q.5561 Manual De Instrucciones página 10

Aspirador sin bolsa

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 19
on human health and the environment, resulting from the presence
EN
of hazardous components, as well as from improper storage and
treatment of this equipment.
27. Recycle packaging materials in accordance with regulations.
Ask local authorities where dedicated collection centres and
rubbish dumps are located.
2. TECHNICAL CHARACTERISTICS
Operating voltage
Energy consumption
Protection class
The general purpose vacuum cleaner (model 600148569) has been tested in accordance with EN
60312-1 and meets the essential requirements of Regulation (EU) 666/2013 for vacuum cleaners.
3. DESCRIPTION
1.
Vacuum cleaner
2.
Suction nozzle
3.
Round brush
4. BEFORE FIRST USE
1.
Unpack the appliance.
2.
Immediately after unpacking, check for any damage sustained during shipping. If your
delivery is damaged or incomplete, please contact our after-sales service.
5. USE
When using your appliance for the first time, it may emit a slight odour. This is normal. Therefore
provide sufficient ventilation. This odour is only temporary and will quickly disappear.
Illustrations from 1 to 17:
1.
Telescopic tube release button.
2.
Connect the suction hoses to the vacuum nozzle.
3.
Connect the vacuum hoses to the handle.
4.
Insert the end of the hose into the mouth at the front of the dust collection container. Turn the
end of the hose clockwise until the hose engages properly.
5.
Pull on the power cable until it reaches the desired length. Insert the plug into a mains
socket.
6.
Turn on: press the on/off switch.
7.
Vacuum by moving back and forth with the suction nozzle.
8.
You can adjust the suction power thanks to the sliding tab on the handle.
9.
Power off: press the on/off switch.
10.
Unplug the plug. Press the button to wind the power cable.
11.
Smooth floors: push the button on the suction nozzle downwards.
12.
Carpet: push the button on the suction nozzle upwards.
13.
During breaks or storage, you can hang the suction nozzle on the back of the vacuum
cleaner.
14.
You can clean joints and cushions using the additional nozzles supplied.
15.
To remove the suction hose, turn the end of the hose anti-clockwise and pull it out.
16.
To remove the collection container: first press the release button.
220-240V~, 50-60Hz
700W
Class II
4.
Crevice nozzle
5.
Telescopic tube
6.
Suction hose with handle
10

Publicidad

loading