Publicidad
Idiomas disponibles
Idiomas disponibles
It is possible to switch between the two selections by
pressing the "+" and "–" buttons. The "+" button will
display the first 3 digits (here "-90"), and the "–" button
will display the last 3 digits (here "819").
The menu is escaped by pressing "Stop" or "Reset".
Sub menu "LOG"
In case of errors and warnings, these are saved in the
control box.
Sub menu "ALL" (All) will display both errors and
warnings. Both location and the corresponding error/
warning code are displayed.
Sub menu "Err" (Error) will only display errors. Location
and the corresponding error code are displayed.
When "LOG" is selected, press "Start", where after
"ALL" is displayed. By pressing "+", "Err" is displayed.
When "ALL" is selected, press "Start", where after
first location (1) and code in the logfile is displayed, or
"EOF" (End Of File) in case no errors or warnings are
logged.
One press on "+" displays next location in the log, and
the corresponding code.
One press on "-" displays previous location in the log,
and the corresponding code.
When pressing "Start", the location and code are
repeated.
When no further errors or warnings are present, "EOF"
is displayed.
When "Err" is selected, press "Start", where after first
location (1) and error code in the logfile is displayed, or
"EOF" (End Of File) in case no errors are logged.
One press on "+" displays next location in the log, and
the corresponding error code.
One press on "-" displays previous location in the log,
and the corresponding error code.
When pressing "Start", the location and error code are
repeated.
When no further errors are present, "EOF" is displayed.
The menu is escaped by pressing "Stop" or "Reset".
Sub menu "APP"
Here is shown a 3 digit code for respectively the soft-
ware version on the operator´s panel, and the control
box.
When "APP" (Application) is selected, press "Start",
where after the software version for the operator´s
panel is displayed.
When pressing the "+" button, the software version for
the control box is displayed.
24
All manuals and user guides at all-guides.com
It is possible to switch between the two selections by
pressing the "+" and "–" buttons. The "+" button will
display the software version for the operator´s panel,
and the "–" button will display the software version for
the AC drive.
The menu is escaped by pressing "Stop" or "Reset".
Publicidad
