VEVOR TT-150 Manual De Instrucciones página 6

1.Pls check if power of the machine comply with your local power or not
before using the machine.
2. Power light turns on after connecting the power, Press D to "3"gear(note:
Chain network will work faster if color is lighter).
Pls turn the button to "bread" on right side of the machine, then heats
willcome from both upper and lower heating tubes, it will heat up gradually.
Inside temperature of the toaster will reach 284℃ in 12 minutes when
bread has been put inside, then temperature will be constant at 284℃.
3. Machine should be pre-heat from 10-12 minutes, then bake 1-2 slices of
bread for testing and check if color of the bread is OK or not, if color is too
light, and you want darker coler, pls adjust D more than "3" gear(note:
Chain network will work slower if color of the break is darker). After
adjusting speed of the chain network, pls put the bread to chain network,
bread will be moved inside of the machine when chain network is moving.
4. Bread will slide to Front side bread tray from firepot.
5. There is back side bread tray on back of the toaster, pls put the hook of
the back tray down, the bread will slide to back side bread tray, pls put
hook of the back tray up after getting the bread.
6. Pls adjust the gear to "BUNS" position, then only upper heating tube will
work when baking steamed bread, pls adjust gear to "STBY"position when
you only need warm up function.
7. Pls turn the button to "OFF" positon and pull off plug.
8. Pls do not use the machine to heat up food with sugar or food will
become liquid after heating, or it will damage the toaster.
9. If cable of toaster is broken, ONLY professional engineers can change it
with specialized cable, pls be noted.
Care and Cleaning
1. Unplug the power cable and ensure that the product is cooled
completely, then cleaning and collection.
2. Cleaning cooking surface with a soft cloth or sponge dampened in a mild
detergent.
3. Please don't use wire brush, stiff brush or other corrosive liquids to clean
it, avoiding damage the surface coating.
- 5 -