Publicidad
Idiomas disponibles
Idiomas disponibles
Jackery SolarSaga 80 Solar Panel Connection Guide
Users who have purchased Jackery SolarSaga 80 can charge the product by referring to the
connection mode shown below. The Jackery SolarSaga 80 supports the parallel connection or the
parallel and then series connections to charge the product. The single input port of the Jackery
Explorer 2000 Plus supports the input of up to six pieces of SolarSaga 80 solar panels, and two input
ports support the input to up to 12 pieces of SolarSaga 80 solar panels. (When the power is
connected with six solar panels in a single input port, the solar panels shall be divided into two
groups, and each group of three solar panels shall be self-connected in parallel and then connected
to Jackery Explorer 2000 Plus through the solar series connector. The solar series connector needs to
be purchased separately.)
For detailed operation instructions on the self-parallel connection of the Jackery SolarSaga 80 solar
panel, please refer to the user manual.
The solar panel charging
output port (DC8020
male, with DC8020 to
DC7909 Adaptor)
Tip: Users can enter the number of solar panels in their own combination according to the number of
solar panels they purchased. Currently, the product supports charging with 1, 2, 3, 4, 5, 6, 8, and 12
80W solar panels in combination.
DC7909 to DC8020 Adaptor Operation Guide
All of our solar panels on sale have been upgraded to include a DC7909 to DC8020 adapter. If you
have purchased a Jackery solar panel without a DC7909 to DC8020 adapter, you can charge your
Jackery Explorer 2000 Plus by following the connection instructions below.
08
Parallel Port（DC 8020 Female）
DC7909 to
DC8020 Adaptor
DC7909 Male
DC8020 Female
Explorer 2000 Plus
Publicidad
