Publicidad
Idiomas disponibles
Idiomas disponibles
CARE AND MAINTENANCE
Failure to care for and monitor your product may result in the risk of serious injury.
• Clean the product regularly with warm water and a soft cloth. Do not use abrasive products, detergents or solvents.
• Dry with a clean, dry soft cloth.
• Make sure there is no accumulation of dirt or debris around the axle, brakes or wheels.
• Do not use cleaning products containing phenol or chlorine, as this could damage aluminium and polyamide materials.
• Lubricate the wheels with a little oil if they squeak.
• Periodically check the wear and strength of all screws and bolts. Replace all broken, damaged or worn parts immediately.
• Check that the brakes are working before each use.
• Check the parking brakes by pushing the handles into the locked position, then trying to push the product.
• If there is a malfunction, do not repair the product yourself. Consult an authorized dealer.
• Checklist :
To keep the product in good condition, check before each use, and check regularly as follows:
Check the product
Screws and fasteners
Stability of the frame and backrest
State of the seat and wheels
Operation of the brakes and folding armrests
Folding and unfolding operation
CHANGE OF OWNERSHIP
The product can be reused. It must first be cleaned and disinfected in accordance with hygiene instructions. When transferring
the product, remember to hand over all the necessary technical documents to the new user. Beforehand, the product must be
inspected by an authorised specialist.
RECYCLING
When the product has become unusable and you have to throw it away: please contact your specialist dealer. If you wish to carry
out recycling for yourself, ask your local waste management company for disposal guidelines.
STORAGE
Failure to observe the storage conditions may lead to deterioration of the product and thus to the risk of serious
injury.
Do not store your product for an extended period of time near a heat source or in the sun (e.g. behind a window or near a
radiator) or near a cold source.
Keep away from all flames and sources of sparks.
Observe the conditions for storing and stowing your product.
• In a dry and temperate place
• Protect your product by packaging it from dust, corrosion (e.g. abrasive elements, sand, sea water, salty air).
• Store all removed parts together in the same place (or locate them if necessary) to avoid mixing them with other products
when reassembling.
• All components must be stored without any load (do not place any objects that are too heavy on the product elements, do
not jam anything...).
Version Mai 2023
Anytime
Every week
X
X
X
Every
month
X
X
9
Publicidad
