Care And Maintenance
VIII.
Cleaning your thermoelectric cooler
Unplug the thermoelectric cooler and remove the bottles.
Wash the inside with a warm water and baking soda solution. The solution should be about 2
tablespoons of baking soda to a quart of water.
The outside of thermoelectric cooler should be cleaned with mild detergent and warm water.
Draw out the water box at the bottom, and wash.
Moving your thermoelectric cooler
Remove all the bottles.
Securely tape down all loose items inside your thermoelectric cooler.
Turn the leveling legs up to the base to avoid damage.
Tape the door.
Be sure the thermoelectric cooler stays in the upright position during transportation.
Problems Disposal
IX.
You can solve many common thermoelectric cooler problems easily, saving you the cost of a possible
service call. Try the suggestion below to see if you can solve the problem before calling service center.
PROBLEM
Thermoelectric cooler do not operate.
Thermoelectric cooler is not cold
enough.
The light does not work.
Vibrations.
The thermoelectric cooler seems to
make too much noise
The door will not close properly.
POSSIBLE CAUSE
Not plugged in using different voltage. The circuit breaker
tripped or a blown fuse.
Check the temperature control setting.
External environment may require a higher setting.
The door is open too often.
The door is not closed completely.
The door seal does not seal properly.
The wine cooler does not have the correct clearance.
Check the service center.
Check to assure that the thermoelectric cooler is level.
The thermoelectric cooler is not level.
Check the fan.
The thermoelectric cooler is not level.
The doors were reversed and not properly installed.
The seal is weak.
The shaves out of position.
8