Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INSTRUCTIONS
Do not operate the machine in rooms with a tempe-
rature of below 5°C. This can cause damages to parts of
it. If it is unavoidable, make sure to drain the water
completely from the appliance after every use (see
"Maintenance - Cleaning of drain pump filter") to avoid
damages caused by frost.
Never use flammable sprays or substances in the imme-
diate proximity of the appliance.
INSTALLATION
Remove all packaging material and transport bolts
before using the appliance. Otherwise, serious damage
may result.
This appliance is equipped with a single inlet valve and
can be connected to the cold water supply only.
Mains plug must be accessible after installation.
Before washing clothes for the first time, the product
shall be operated once throughout all the procedures
without any clothes inside.
Before using the washing machine, the product shall
be calibrated.
Do not put any excessively heavy objects on the
appliance, like water containers or heating devices.
The new hose-sets supplied with the appliance are to be
used and that old hose-sets should not be reused.
Max. Inlet water pressure 1 MPa. Min. inlet water pressure
0.05 MPa.
ELECTRICAL CONNECTION
Make sure the supply cable is not trapped by the ma-
chine, it can get damaged.
Connect the product to a grounded outlet protected by
a fuse complying with the values in the "Technical
specifications" table. The grounding installation has to be
made by a qualified electrician. Ensure that the machine
is installed in accordance with the local regulations.
5
Publicidad
