GE Profile OPAL P4INSASBVTS Manual Del Propietário página 8

Care and Cleaning
To keep nugget ice tasting fresh and the ice maker
recommended.
Sanitizing is recommended once per week to keep the unit
hygienic and disinfected.
Descaling is recommended for removing hard mineral
depending on water hardness.
WARNING
cleaning with bleach, use bleach in a well ventilated area
System Descaling / Sanitizing Procedure
First Time Use:
Cleaning Notification: After 100 hours of ice making, the
Cleaning indicator will flash to alert the user that a descale
completed but will not prevent the machine from making ice
in the meantime. This alert is hard water dependent. Please
reference the hard water map on Page 6 for guidance.
and then unplug the Opal.
not present, first remove the screen intake filter and
rinse it with water to clean out any debris that may have
screen intake filter so it is in place during the descaling or
the side tank is present, remove the side tank from the
side tank base and disconnect the side tank base before
draining.
unplug the product, then use a soft cloth dampened with
WARNING
hand, and when not in use.
NOTE:
Unplug the product before cleaning by
49-9000060 Rev. 0