Whittier Wood Stratford 911KFSI Instrucciones De Montaje página 3

911KFSI Stratford Bench
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED: Phillips Screwdriver, Outdoor Wood Glue, Hex Wrench (provided)
H x 2
H
Fig. 1a
1) Glue one Wood Dowel (H) in each end of seat brace. See FIGURE 1a.
Attach the Back (C), with the dowel hole in lower rail to the front, and the Apron (E) to the seat
assembly. See FIGURE 1b.
F x 4
J x 2
F
J
Fig. 2a
2) Loosely attach the Left and Right Leg Assembly (A & B) to the seat assembly with four Barrel
Bolts (F) and Barrel Nuts (G) and two 7 x 70mm Hex Screws (I). See FIGURE 2.
Insert 6 x 40mm Hex Screw (J) through the two predrilled holes in each end of seat into the leg
assemblies. See FIGURE 2a.
D
H
I x 2
G x 4
I
A
F
G
J
GLUE ALL
DOWELS
C
B
F
G
G
F
Fig. 2
Fig. 1b
GLUE ALL
DOWELS
I
F
G
911KFSI (10/07) – Page 3
D
E