Bodum BARISTA 11901 Instrucciones De Uso página 13

4. Press the button twice, the white indicator light
will flash three times. The disk will start to rotate.
The unit starts to heat up, enters the Hot Chocolate
program, and the white indicator light will remain
on during work.
5. Press the button three times in succession, the
blue indicator light will flash three times. The whisk
will start to rotate. The unit will enter the Cold
Frothing program, without heating up, and the blue
indicator light will remain on during work.
NOTE: Switching from one program to another must
be completed within three seconds.
CAUTION: If you want to prepare more milk froth,
let the milk frother cool down for a few minutes
before further use. As long as the milk frother is hot,
the thermostat prevents it from being used. You can
rinse the inside of the milk frother with cold water to
accelerate the cooling process.
HOT 1. Connect the power cord plug to a suitable power
FROTHING outlet.
2. Open the lid and place the frothing whisk (9) onto
the rotating shaft.
3. Fill the milk container in cold milk. The milk level
must be between the mark "MAX
4. Put the lid on firmly by pushing it down slightly.
5. Place the milk container on the machine base.
6. Press the button once, the red indicator light will
flash three times. The whisk will start to rotate. The
unit starts to heat up and enters the Hot Frothing
program.
7. The temperature of milk will reach approx. 65°C
and the product will stop operating when ready.
13
" and "MIN".
EN