Hayward HCF Serie Manual De Instalación Y Operación página 5

Dimensions (Inches)
Filter
Model
Number
A B
HCF230C 16.25 23.75
HCF234C 18.75 26.25
HCF236C 18.75 26.25
HCF336C 18.5 26.22
* Fill height level (F) may vary depending on media size. Always fill with the required "Filter Sand Quantity" shown above.
WARNING – Read and follow all instructions.
WARNING – This product should be installed and serviced only by a qualified professional.
Note: Filters are supplied on pallet with accessories included. Due to their weight and size it is recommended that mechanical means be employed to
move the filter into position. It is also very important to inspect the filters carefully before installing. Make note on the shipping paperwork if there is any
damage to the packaging. FRP filters can be damaged during transportation and it is the responsibility of the installer to inspect at the time of delivery.
Damages to filters from transportation that are not noted on the bill of lading are not covered by Hayward's warranty policy and all costs to repair will be
the responsibility of the owner.
Never put the sand into the filter until it is in its final working position and all prior steps are complete. The filter should be accessible for periodic mainte-
nance or media change. It is absolutely necessary to leave a minimum access space around the filter(s), as defined above.
Sand Fill Height Level*
C D E F
31.49 42.60 2 13.5
33.85 46.40 2 17.5
37.40 47.60 2.5 20.5
37.40 47.60 3 20.5
Installation
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
Max Flow/
Filter Area Backwash
Rate
Sq. Ft. Sq. M GPM LPM
4.90 .45 98 371
6.31 .59 126 476
7.05 .65 141 533
7.05 .65 141 533
Clearance (Inches)
Filter
Sand
Qty*
(Lbs)
Vertical Horizontal
600 18 4
750 18 4
900 18 4
900 18 4
4