TEFAL OptiGrill GC7P0810 Instrucciones De Uso página 5

3b - MANUAL cooking with manual mode
Manual cooking - select a temperature and preheat before cooking:
If you select Manual mode, you have manual control of the cooking time. This manual mode includes tem-
perature control of 10 ° C, from 120 ° C to 270 ° C.
If you are uncertain about what cooking mode to use for other foods because it is not listed above, please refer to the
"Cooking table for out of program food" page 12.
28
29
30
Cooking
31
8
28 Press the "-" and "+" buttons to select pro-
gram P4.When the P4 program is reached,
press the "OK / START" button.
NB: I f you have selected the wrong program,
return to stage 8.
Press the "-" and "+" buttons to select the
cooking temperature.Confirm by pressing
"OK / START".
29 Press the "-" and "+" buttons to select the
Timing. Confirm by pressing "OK / START".
Note: You can start the heating with time at
0: 00. You can change the Timing at any time
using "-" and "+".
If there is no food in the grill, preheating be-
gins. The preheating indicator (thermometer
+ bar graph) flashes throughout the preheat-
ing phase.
Warning: Even when the timer is on 0:00, the
appliance continue to preheat.
Wait for 4-7 minutes. If you have placed food
in the Grill, cooking starts directly, as well as
the countdown of the selected time.
Otherwise, you must wait until the thermom-
eter and 3 lines stop flashing, before opening
the grill and adding food.
30 When the pre-heating is complete a
melody is displayed ,the thermometer and
the 3 lines stop flashing, the timing falshing.
The thermometer remains on during the
cooking to indicate that the appliance is heat-
ing up
31 - 32 After pre-heating, the appliance is ready
for use. Open the grill and place the food on
the cooking plate
Comments: if the appliance remains open
for too long, the safety system will turn off the
appliance automatically.
32
Cooking
33
34
Comments
37
38
40
33 Close the appliance to start the cooking cycle.
Note: For very thin foods, close the
appliance and wait for the display to show
"OK". Then press "OK" to allow the appliance to
recognize the food and start the cooking cycle.
34 The display shows the setpoint temperature,
alternately with the time count.
35 When the timer reaches 0, a sound is
playing. Press OK to stop the alert sound. The
appliance continues to heat.
36 Press the on/off button to turn off the
appliance.
35
37 Note: You can change the T ° and the
Timing at any time by using "-" and "+" when
displayed on the screen.
Regularly check the cooking by opening
lightly the grill.
Please note, especially on meat, it is normal
that cooking result vary depending on type,
quality and origin of food.
Warning: Even when the timer is on 0:00, the
appliance continues to heat.
38 - 39 Open the appliance and remove your
food when the desired cooking is got.
40 Close the appliance without food on plate.
The control panel will light up and set itself to
' c hoice of program' mode.
39
Restart to n°28 for a new cooking cycle in
manual mode.
Comment: the security system will turn off
automatically if no program selection is made.
en
36
9