Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
3. OPERATION
Using the appliance
Press the Power button to turn the appliance on.
-
-
Hold down the Power button for 2 seconds to turn the appliance off.
The steam station features an electronic temperature control, eliminating the need of
-
manually adjusting the temperature.
Filling up the water tank
Make sure the iron is unplugged from the mains.
1.
2.
Remove the water tank and open the cap.
Fill the water tank up to the MAX mark and close the cap.
3.
Steam ironing
1. Fill the water tank as described in the section 'Filling up the water tank'.
2. Plug the iron to the mains.
-
Wait for the iron to heat up before steam ironing to prevent the soleplate from leaking.
Wait until the indicator light is no longer flashing to ensure that the soleplate is hot enough.
-
3.1 To activate continuous steam, press the Mode button. You can select between Steam mode
and ECO Steam Mode. You can switch modes during ironing at any time by pressing the
same button.
If you do not wish to use continuous steam, press the Steam button directly.
3.2
4. Once finished ironing, place the iron upright or on the base.
5. Unplug the iron from the mains. Discard the excess water and let the iron to cool down.
Ironing tips
-
Always check if the garment to be steamed has a label with instructions for ironing, and if
it has, follow the instructions.
-
Synthetic fibre and silk fabrics should be ironed on their inner side to avoid them from
being damaged.
-
Velvet and other textures that rapidly become shiny should be ironed in one direction with
light pressure applied. Always keep the iron moving.
-
Pure wool fabrics (100% wool) may be ironed with the steam iron. Use a dry cloth as a mat
and then select the corresponding fabric setting for ironing.
-
Never iron over zip, rivet in the cloth, this will damage the soleplate.
4. CLEANING AND MAINTENANCE
Cleaning
If the pump has been running for 25 hours, the Cleaning indicator light will come on.
1.
Make sure there is enough water in the tank before cleaning. If necessary, fill up the water
28
IRONHERO 3200 STATION
Publicidad
