Flex GBL 790 18-EC Instrucciones De Funcionamiento Originales página 14

■ While operating the machine, always
wear non-slip and protective footwear.
Do not operate the machine when
barefoot or wearing open sandals. This
reduces the risk of injury to the feet.
■ Do not wear loose fitting clothing or
articles such as scarves, strings, chains,
ties, etc., that could get drawn into the
air inlets. Tie back or cover long hair to
make sure it does not get drawn into the air
inlets. If any of these items are drawn into the
air inlets, it can increase the risk of personal
injury.
■ Keep bystanders away while operating
the machine. Thrown debris can increase
the risk of personal injury.
■ Never point the blower nozzle in the
direction of people or pets or in the
direction of windows. Use extra caution
when blowing debris near solid objects,
such as trees, automobiles and walls that can
cause debris to ricochet. Thrown objects can
damage property and increase the risk of
personal injury.
■ Do not use the machine to blow
anything that is burning or smoking,
such as cigarettes, matches or hot ashes.
These ignition sources may increase the risk
of fire.
■ Do not touch the fan while still in
motion. Turn off the machine and wait
until the fan stops before removing any
part that may give access to the fan. This
reduces the risk of injury from moving parts.
■ When clearing jammed material or
servicing the machine, make sure the
power switch is off. Unexpected starting of
the machine while clearing jammed material
or servicing may result in serious personal
injury.
Noise and vibration
The noise and vibration values have been
determined in accordance with EN50636-2-
100.
The A evaluated noise level of the machine is
typically:
– Sound pressure level L
– Sound power level L
– Uncertainty:
Total vibration value:
14
: 80.2 dB(A);
pA
: 100 dB(A);
WA
K = 2.36 dB.
– Emission value a
– Uncertainty:
WARNING
The indicated measurements refer to new
machines. Daily use causes the noise and
vibration values to change.
NOTE
The declared vibration total value(s) and
the declared noise emission level given in
this information sheet has been measured
in accordance with a measurement method
standardized in EN 60335-1 and may be used
to compare one machine with another.
It may be used for a preliminary assessment
of exposure. The specified vibration emission
level represents the main applications of the
machine.
However, if the machine is used for different
applications, with different cutting accessories
or poorly maintained, the vibration emission
level may differ.
This may significantly increase the exposure
level over the total working period.
To make an accurate estimation of the vibration
exposure level, it is also necessary to take into
account the times when the tool is switched off
or running but not actually in use.
This may significantly decrease the exposure
level over the total working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the machine and the cutting
accessories, keep the hands warm, organization
of work patterns.
WARNING!
The vibration and noise emissions during
actual use of the machine can differ from the
declared value in which the machine is used;
In order to protect the operator, user should
wear gloves and ear protectors in the actual
conditions of use.
CAUTION!
Wear ear defenders at a sound pressure
above 85 dB(A).
GBL 790 18-EC
: <2.5 m/s
h
K = 1.5 m/s
2
2