Descargar Imprimir esta página

Hoover HF122CAR 011 Manual De Instrucciones página 9

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 36
USING YOUR CLEANER
There are three working modes:
• TURBO MODE:
The product will start on full power with agitator ON when you press the ON/OFF switch and stop
[4a]
when released.
• ECO MODE:
The product will start on lower power with agitator ON when you press the ON/OFF switch 2 times
consecutively and stop when released.
• CONTINUOUS MODE: To enable continuous mode push back lever until locked. It is advisable to disable
continuous mode after every time actioned, this is completed by simply pushing the lever forward to the
unlocked position. [4b]
IMPORTANT:
After each use of your product, please ensure to push the switch lever forward to the unlocked position.
Failure to do so may result in a reduction in battery life or failure.
SAFETY PROTECTION SYSTEM
To ensure the reliability of the product is not affected if used under arduous conditions, the product features an integrated
[13]
safety protection system.
NOTE: The Safety protection system will action if the agitator has a blockage or is locked, once actioned the agitator will stop
rotating, the white Led lights on the front of the nozzle will go out. If this happens, simply switch off your product and clear the
agitator obstruction. To resume cleaning, press the on/off button and the product will restart in turbo mode.
BATTERY
DISPLAY LED:
This cleaner is equipped with a Battery Status LED Lights.
BATTERY LEVEL:
White colour: 100% - 5% charge
Blink White colour:
5% charge
Red colour: during the charging
There are two methods of charging:
Charge the battery when fitted to the product.
Insert the battery charger jack to the battery pack. The LED status indicator will illuminate red when charging. When
charging is complete, the LED status indicator will illuminate white.
Charge the battery when removed from the product. [3]
Remove the battery from the product by pressing the battery release button.
Insert the battery charger jack to the battery pack. The battery pack LED will illuminate red when charging. When charging
is complete, the LED indicator will illuminate white.
NOTE: It is normal for the charger to become warm to touch when charging. Use only the charger supplied with your
product.
NOTE: If you are not going to use the cleaner for a long period of time, please remove the removable battery pack from
the cleaner to maintain the battery life.
ACCESSORIES*
CREVICE TOOL ON BOARD, INTEGRATED DUSTING BRUSH, MINI TURBO NOZZLE*, ACCESSORY ADAPTOR*,
UP TO TOP TOOL*, RADIATOR TOOL*, DEEP CLEANING BRUSH* AND LONG FLEXIBLE CREVICE TOOL*.
All the accessories can be fitted on the main product and on the tube. [5]
NOTE: To remove the nozzle or main body unit from the tube, press the respective release button and pull apart.
RADIATOR TOOL* / DEEP CLEANING BRUSH*/ UP TO TOP TOOL*
The accessory adaptor* must be fitted when using these 3 accessories. [5]
NOTE: There is only one way to store the crevice tool in the main body. Align the slot on the crevice tool with the arrow on
the main body, push crevice tool into the main body. [16]
NOTE: The mini-turbo nozzle is ideal for deep cleaning textile surfaces (i.e. sofas) and pet hair removal. Move it steadily
backwards and forwards. After using, please remove hair / threads collected on the brush with scissors if necessary.
NOTE: The up to top tool is designed to easily clean delicate surfaces without scratching and to reach difficult areas.
* Certain Models Only
[4b]
[2]
4
GB

Publicidad

loading

Este manual también es adecuado para:

H-free 100