Publicidad
Idiomas disponibles
Idiomas disponibles
• Use the cover SHARP logo when you install the monitor in
portrait orientation.
Flat installation
• When using the monitor laying flat on a surface (when
the monitor is tilted more than 20 degrees upward from
the perpendicular in relation to a level surface), consult
an authorized dealer because there are some specific
mounting conditions.
Adhere to the following. Failing to adhere to the following
may cause malfunctions.
- Set "HORIZONTAL INSTALLATION" in the ADMIN menu
to "FACE UP". (See OPERATION MANUAL.)
- Use this monitor at the ambient temperature between
41°F (5°C) and 86°F (30°C). Provide 7-7/8 inch (200
mm) or more space between the monitor and the floor
or other mounting surfaces and surrounding objects to
prevent heat from accumulating inside. If it is difficult to
provide sufficient space or if the ambient temperature
may be outside of the range of 41°F (5°C) to 86°F (30°C),
install a fan or take other measures to keep the ambient
temperature within the required range.
7-7/8 [200]
7-7/8
[200]
7-7/8 [200]
- Do not press hard on the LCD panel or otherwise subject
it to impacts.
Cover SHARP logo
Unit: inch [mm]
7-7/8
[200]
7-7/8
[200]
5
E
Publicidad
