Deep fryer
6.3 How to use
Operating elements and advice.
!
The operating elements control the functions.
Switch/Button
1/0
Thermostat switch
!
The pilot lights show the operating state.
When the pilot light beside the switch 1/0 is on:
!
The appliance is on.
When the pilot light next to the thermostat switch is on:
!
The appliance heats the oil until it achieves the selected temperature.
To fill up
Fill the vessel up to the mark with
!
oil.
!
melted fat.
To switch on
"
Check the fill level.
"
Refill if necessary.
"
Turn the switch 1/0 (1).
The pilot light on the switch 1/0 is on.
"
Set the thermostat switch at the desired temperature.
The appliance is on.
The pilot light is on.
The appliance heats the oil.
Note The heating-up time depends on the type of oil and the surrounding
conditions.
When the appliance reaches the set temperature:
!
The pilot light is switched off.
To deep-fry
"
Put dry food into the wire basket.
"
Set the wire basket to place.
When the food is deep-frozen:
"
Fill the basket only half.
"
Set the wire basket slowly to place.
To switch off
To contact our customer service please visit www.servicevega.com
To switch the appliance on and off
Adjusting the temperature
Function
13