9. When
installation
is complete,
connect
the
power
cord and set the time
of day on the
electronic
oven
control
as explained
in the
Owner's
Guide.
10. Verify
the operation
of the electronic
control
functions
as per instructions
given
in
the Owner's
Guide.
11. Make
sure the air flow
from
the oven
vent
and the air flow
to the bottom
front
of
range
is unobstructed.
When
All Hookups
are Complete
Make sure all controls are left in the OFF position.
NOTE: Refer to Owner's Guide for complete instructions for
ordering parts or making inquiries about this range.
NOTE: Refer to Owner's Guide for operating instructions
and cleaning instructions.
Important:
See next
page for Anti-Tip
Bracket
Installation
Instructions.
Model and Serial Number
Location
The model and serial plate is located in the left hand
side, underneath the surface cooktop.
When ordering parts for or making inquires about your
range, always be sure to include the model and serial
numbers and a lot number or letter from the serial plate
of your range.
Your serial plate also tells you the rating of the burners
and type of fuel and the pressure the range was adjusted
for when it left the factory.
Before
You
Call for Service
Read the Avoid Service Checklist and operating
instructions in your Use and Care Guide.
Check to make sure the house fuse or circuit breaker for
your cooktop are not blown or open.
8