Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
Mounting the Bracket
Two options are provided for mounting the bracket (self-
tapping screws or machine screws with nuts) to ensure a
mounting option ideal for your mounting location. Avoid
obstructing airflow to the rear cooling fins on the radio.
NOTE: Mounting holes should be drilled to 7/32". Before
drilling the mounting holes, make sure the area behind the
panel where the holes are desired is clear of wires and fuels,
vacuum and or brake lines.
Self-Tapping
Machine Screws
Screws
With Nuts
(Hole size 7/32")
(Hole size 7/32")
WARNING: To disconnect the vehicle battery before wiring
the unit.
Attaching the Radio
Once the bracket is securely mounted, use the four included
M4 machine screws to fasten the bracket to the back of the
radio. Alternatively, the radio can be mounted directly to the
instrument panel if access to the rear of the instrument panel.
CAUTION! Do not over tighten the 4 mounting screws. Hand
tighten only.
Mounting Stack
Mounting machine screw
Bracket metal
Vehicle mounting surface
Regular Mounting
Washer
Nut
5
Overhead Mounting
Publicidad
