cecotec IRONHERO 2600 VITAL Manual De Instrucciones página 37

cleaning function more frequently.) Make sure the iron is unplugged, turn the steam switch
to the "O" position and fill the water tank to the MAX position.
Do not put vinegar or other liquid solutions in the water tank.
-
Select the maximum ironing temperature and plug the appliance into the mains socket.
-
Unplug the iron when the power indicator light has gone out, rest the iron on a base and
press and hold the self-cleaning button while moving the iron back and forth.
Steam and boiling water will come out of the soleplate of the iron, then any impurities (if
-
any) will be expelled.
Release the self-cleaning button as soon as all the water in the tank has been used up.
-
Repeat the self-cleaning process if the iron still contains many impurities.
-
After the self-cleaning process, plug the iron into the socket and allow it to heat up so that
-
the soleplate dries.
Unplug the iron when it has reached the set ironing temperature.
-
After this, gently move the iron over a piece of used cloth to remove any water stains that
-
may have formed on the soleplate and allow the iron to cool down before storing it.
Anti-drip
1. The anti-drip system is designed to automatically prevent water from escaping from the
soleplate when the iron is too cold.
2. During the use of the iron, the anti-drip system may emit a loud clicking noise, especially
during heating or cooling. This is perfectly normal and indicates that the system is working
properly.
Built-in anti-scale system
The anti-limescale cartridge is designed to reduce limescale build-up that occurs during steam
ironing. This will extend the life of your iron. However, please note that the anti-scale cartridge
will not completely stop the natural limescale build-up process.
Type of fabric and position of the temperature/thermostat knob: Fig. 2
4. CLEANING AND MAINTENANCE
Before cleaning the iron, unplug it from the socket and allow it to cool down sufficiently.
1. Clean the soleplate with a damp cloth and a non-abrasive (liquid) cleaner.
2. If the fibre is stuck to the soleplate, use a cloth dampened with vinegar to clean the plate.
3. Never use strong acids to avoid damaging the soleplate.
4. If limescale blocks the steam hole, remove it with a toothpick. Do not damage the surface
of the soleplate.
5. Place the iron on its end, allow it to cool down sufficiently and, in the meantime, pour out
the excess water from the box and set the steam switch to the "O" position.
ENGLISH
IRONHERO 2600 VITAL
37