G Operating Instructions
I
mportant information - Quick-
reference guide:
• This quick-reference guide contains the
most important basic information, such as
safety instructions and the steps necessary to
operate the product.
• The full text of the manual is available at the
following internet address:
www.hama.com -> 00176634 ->
Downloads
• Save the manual on your computer for
reference and print it out if possible.
1. Explanation of warning symbols and
notes
Risk of electric shock
This symbol indicates a risk of electric shock
from touching uninsulated product parts that
may carry hazardous voltage.
Warning
This symbol is used to indicate safety
instructions or to draw your attention to
speci c hazards and risks.
Note
This symbol is used to indicate additional
information or important notes.
2. Explanation of symbols used on the
product label
Non-dimmable.
The lamp is not suitable for use with
a conventional dimmer.
Electrical device of safety class II.
Protection against electric shock thanks
to reinforced or double insulation of
live parts.
2
3. Package contents
• 1 x neon LED strip
• 1 x quick-start guide
• 1 x LED driver
• 10 x mounting clips
4. Safety instructions
• The product is intended for private, non-com-
mercial use only.
• Use the product only for the intended
purpose.
• Do not drop the product and do not expose it
to any major shocks.
• Do not operate the product outside the power
limits given in the speci cations.
• Do not use the LED strip in the packaging or
in a rolled-up state.
• Do not modify the product in any way. Doing
so voids the warranty.
• Children must not play with the device.
Children may not clean the product or
perform user maintenance without
supervision.
• Dispose of packaging material immediately
in accordance with the locally applicable
regulations.
• Do not use the product in areas in which
electronic products are not permitted.
• Only use the article under moderate climatic
conditions.
• Do not bend or crush the cable.
• Take care not to kink the LED strip. This can
cause damage to the LED strip.
• Do not attempt to service or repair the
product yourself. Leave any and all service
work to quali ed experts.
• The product must only be operated on a
supply network as described on the type
plate.
• Do not open the device or continue to
operate it if it becomes damaged.
• Not suitable for operation with dimmers,
electrical switches, photo cells, time switches or
twilight switches.
• As with all electrical products, this device
should be kept out of the reach of children.