Publicidad
Idiomas disponibles
Idiomas disponibles
4. METHODS OF USING
●
First, open any one of the outlet valves at the outlet of the water heater, then, open the inlet valve.
The water heater gets filled with water. When water flows out of the outlet pipe it implies that the
heater has been filled fully with water, and the outlet valve can be closed.
During normal operation, the inlet valve shall be always kept open.
●
Insert the supply plug into the socket.
●
If the indicator lights up, the thermostat will automatically control the temperature. When the water
temperature inside the heater has reached the set temperature, it will switch off automatically,
when the water temperature falls below the set point the heater will be turned on automatically to
restore the heating.
Rotate the knob according to the marking on the knob to increase or decrease the setting
①
temperature.
②
The White (up) LED is the power light. The White (down) LED is the heating light. The power light
remains ON when machine is connected to power. The heating light will be ON once the knob is
rotated to adjust the temperature and will be OFF when the heating process is finished.
NOTE
Power
Heating
MAX
OFF
1
7
(Fig.6)
Publicidad
