IMPORTANT!
Microbial contamination
A personal use of the nebulizer and of the accessories is recommended in order to avoid any risks of infection.
Interactions
The materials used that come into contact with drugs have been tested with a wide range of drugs.
However, due to the variety and continuous evolution of the drugs, the possibility of a chemical interaction
cannot be excluded. Once opened, the drug should be used as soon as possible, and prolonged contact
between drug and nebulizer should be avoided.
The use of ESSENTIAL OILS can cause damage to the nebulizer.
Disposal: In conformity with Directive 2002/96/EC on waste electrical and electronic equipment
(WEEE), at the end of its life the unit should be taken to an electrical appliance collection point for its
environmentally friendly disposal.
UNIT TECHNICAL FEATURES
Mod. MEDINEB F700
230V ~ 50Hz 140VA
Voltage:
Fuse:
T 2A - 250V
In compliance
Dir. 93/42/EEC
with:
(EN 60 601-1)
Operating pressure (with nebulizer): 0.8 bar approx.
Max pressure:
Compressor air output:
Dimensions:
Weight:
Sound level (at 1 m):
Continuous use
SYMBOLS
Class II unit
Type B unit
Warning: follow the
"Instructions for use"
Alternating current
RAPIDFLAEM 2 NEBULIZER– TECHNICAL FEATURES
Capacity max:
7 ml
*Aerosol output:
with cap B
without cap B
*Particle:
with cap B
without cap B
*Average values measured with 0.9% saline solution. Certifi ed with TSI Aerosizer 3220 computerized
laser system in compliance with Flaem internal procedure.
Operating requirements: temperature min. 10°C; max 40°C
air humidity min. 10%; max 95% RH
Storage requirements:
temperature min. -25°C; max 70°C
air humidity min. 10%; max 95% RH
Operating/storage atmospheric pressure: min. 690 hPa; max. 1060 hPa P
Electromagnetic compatibility
This aerosol therapy unit is designed to meet the current requirements for electromagnetic compatibility. However
if you suspect that the unit is interfering with the operation of your TV, radio or other electrical appliance, try
relocating the unit until the interference ceases. Alternatively try plugging the unit into a different power socket.
The Manufacturer, the Retailer and the Importer are responsible for safety, reliability and performance of the unit
only if: • the unit is used in accordance with the instructions for use; • the electrical system of the facility where
the unit is used adheres to IEC standards; • assembly, additions, recalibrations, modifi cations or repairs are
carried out by authorized personnel.
The manufacturer reserves the right to introduce technical changes.
115V ~ 60Hz 180VA
T 3A - 250V
2.5 bar approx.
10 LPM approx.
20x27x10.5 cm
2.3 Kg
58 dB (A) approx.
0.25 ml/min approx.
0.51 ml/min approx.
MMAD 2.8 µm
MMAD 3.1 µm
7
220V ~ 60Hz 160VA
T 2A - 250V
Switch OFF
Switch ON
Never use the unit while
having a bath or shower
Latex Free
100V ~ 50/60Hz
T 5A - 250V