GE GFXP1308FWW Instrucciones De Instalación página 2

Installation Instructions
[]
PREPARE THE PEDESTAL
Pull the drawer
out as far as it
will go.
Remove
screws
from drawer
slides. Slide
drawer out of
the base and
set aside.
ITI INSTALL THE PEDESTAL TO THE
WASHER OR DRYER
r_ place the pedestal against the bottom of the
unit. Check to be sure the drawer front is at
the front of the washer.
To ottoch to the dry_."
Align the holes in the pedestal with the holes
in the bottom of the unit. Use a Phillips
screwdriver to install the 4 screws through the
pedestal and into the unit - do not tighten.
r_ Slide the pedestal toward the unit until it is
aligned front to back. Use an 8 mm socket
wrench to securely tighten the screws.
To ottoch to the wosher:
r_ Align the holes in the pedestal with the holes in
the bottom of the unit. Use a 9/16" socket
wrench to install the 4 washer mounting bolts
through the pedestal and into the unit - do not
tighten.
[] Slide the pedestal toward the unit until it is
aligned front to back. Use a 9/16" socket
wrench to securely tighten the bolts.
2