Making A Call - Kenwood KDC-BT648U Manual De Instrucciones

the Bluetooth device. PIN code is set to
"0000" as the default. You can change this
code. Refer to [PIN CODE EDIT] under
<Bluetooth Setup> (page 22).
By operating the Bluetooth device, start
4
hands-free connection.
Step 2. Connection
If you have registered 2 or more cell-
phones, you need to select one of them.
For more details, see <Selecting the
Bluetooth Device> (page 20).
When a cell-phone is connected, the "BT"
indicator lights up.
Step 3. Hands-free phoning
You can do hand-free phoning when the
connection is made.
■
When registering from this unit. Refer to
<Registering Bluetooth Device (Pairing)>
(page 19).

Making a Call

/
1
KDC-BT648U KDC-X695
Press to enter Bluetooth mode.
/
KDC-X395 KDC-348U
Press and hold the volume knob to enter
Bluetooth mode.
Turn the volume knob to select a dialing
2
method, then press to enter.
■
Operation method of each mode is
described below.
"PHONE BOOK": Calling a Number in the
–
Phone Book
"OUTGOING"/ "INCOMING"/ "MISSED
–
CALLS": Calling a Number in the Call
Log
"NUMBER DIAL": Dial a Number
–
"VOICE RECOG": Make a Voice Dialing
–
Call
Speed Dialing (Preset Dial)
–
■ Switches between name and phone
number, press DISP.
■
To return to the Bluetooth mode, press and
hold .
■
To exit Bluetooth mode, press
Calling a Number in the Phone Book
Turn the volume knob to select "PHONE
2
16
English
BOOK", then press to enter.
Press
3
Turn the volume knob to select the
4
character to be searched for.
■
■
Press the volume knob to start searching.
5
Turn the volume knob to select a name
6
and category.
■
Press the volume knob to make a call.
7
■
To use the Phone Book, it must be
downloaded to this unit in advance. Refer to
<Downloading the Phone Book> (page 17).
■
During search, a non-accent character such
as "u" is searched for instead of an accent
character such as "ü".
■
The category items in the Phone Book are
displayed as follows.
GE: General ; HM: Home ; OF: Office ;
MO: Mobile ; OT: Other
Calling a Number in the Call Log
Turn the volume knob to select the
2
"OUTGOING" (outgoing call), "INCOMING"
(incoming call), or "MISSED CALLS"
(missed call), then press to enter.
Turn the volume knob to select a name or
3
phone number.
4 Press the volume knob to make a call.
■
The outgoing call list and the incoming call
list, and the missed call list are the lists of
calls originated from and received at this
unit. They are not the ones stored in the
cell-phone memory.
Dial a Number
Turn the volume knob to select "NUMBER
2
DIAL", then press to enter.
Turn the volume knob to select the
3
phone number
SRC.
■
■
■
to enter alphabet search mode.
To move to the next row, press BAND.
To return to the Phone Book mode, press
.
To move to the next character, press 4
/ ¢.
To move to the next digit, press ¢.
To delete the last digit, press 4.
Press number button (1 – 0), #(FM+),