cecotec IRONHERO 1800 VITAL Manual De Instrucciones página 38

ENGLISH
- If the buzzing sound becomes louder and the iron does not emit steam, it means that the
water tank needs to be filled.
After use
1. Before switching off the appliance, wait 15 seconds for the steam to dissipate. Then, press
the on/off button or unplug the appliance.
2. Remove the tank, open the cap, and empty the tank into a bucket or sink.
3. Place the appliance upright on a flat table and allow it to cool completely before storing it.
4. CLEANING AND MAINTENANCE
1. Remove the brush from the head and clean it with a damp cloth.
2. Do not use aggressive or corrosive cleaners or solvents.
3. Do not put the garment steamer in water or any other liquid.
4. Do not strike the iron or attempt to bend it.
5. Do not attempt to disassemble the device yourself.
6. Empty the water tank after each use.
7. Do not store the appliance in damp places.
8. Keep the appliance away from heat sources and do not expose it to direct sunlight.
9. Always make sure that the steam outlets are not obstructed and clean them if necessary.
10. Store the iron vertically on a flat surface such as a cupboard.
5. TROUBLESHOOTING
Problem
The iron does not heat up
The iron does not emit steam
The water tank leaks
38
IRONHERO 1800 VITAL
Solution
Check that the iron is correctly plugged into the mains
socket.
Make sure the water tank is correctly assembled.
Check the water level in the tank.
Press the steam button harder.
Make sure that the water level does not exceed the
maximum level.
Make sure the lid is properly closed.
Follow the instructions in the manual and always keep
the garment steamer in an upright position.