G
S
-U
UK
iordani
eat
p
HOW TO OPEN
THE CHAIR MOUNTED SEAT
W A R N I N G :
W h e n o p e ni n g th e ch ai r,
ensure that your child or other child is at
a safe distance. Ensure that during these
operations, the movable parts of the chair
do not come into contact with your child.
1.
Take out the chair booster seat.
2.
Release the lock.
3.
Put the chair plate beside the chair
booster seat.
4.
Put the foot rest like the picture.
5.
The chair booster seat is unfold.
6.
Push the the circle in the plastic.
7.
P u sh th e p l a st i c l ike th e p i ct u re .
WARNING!
The chair mouted seat set
to the lowest position may used only
to transport the
same and not to sit the child. Do not
adjust the height of the booster seat
with the child sitting. Make adjustments
only with the booster without the child.
8.
Then the chair booster seat is in the one
position.
HOW TO FIT
THE CHAIR BOOSTER SEAT
ON ADULT CHAIR
9.
This booster seat is designed to fit
on adult chairs with a minimum seat
dimension of 325mm width by 320
mm depth, with a minimum backrest
height of 440mm.
10.
Place the chair booster seat on the adult
chair.
11.
Pull the back seat belt to the chair
backrest.
12.
Fasten the buckle and tighten the belt.
13.
Pull the bottom seat belt to the chair
bottom.
14.
Fasten the buckle and tighten the belt.
HOW TO USE THE SAFETY HARNESS
15.
Place the child on the seat and adjust
2.0
chair booster seat
strap length: belt, croth strap and
harness all can be adjusted the length
to use snug.
16.
Press the left side in the button of the
buckle to release the left waist belt.
17.
Same operating for right waist belt.
18.
"D" rings are included for an andditional
harness if desired.
HOW TO CLOSE THE CHAIR
BOOSTER SEAT
19.
Push the belt like the picture.
20.
Push the both side circle like the picture.
21.
To forward the plastic then the chair
booster seat while like this.
22.
Push the circle to the plastic like the
picture.
23.
Make the belt buckle fasten like the
picture.
24.
Fasten the belt from the seat under to
the upper side like the picutre.
25.
Fasten the back belt buckle like the
picture.
26.
Finish the belt fasten.
27.
Put the seat in to the carry bag like the
picture.
CARE AND MAINTENANCE
The cleaning and maintenance of this
product must be carried out on a regular
basis by the user.
CLEANING
The cover is removable. Clean the fabric
parts with a damp sponge and neutral
detergent. Please refer to the product's care
label. Routinely wipe clean plastic parts with
a soft damp cloth. Always dry the metal parts
to prevent the forma- tion of rust with water.
MAINTENANCE
P r o l o n g e d e x p o s u r e t o t h e s u n a n d
inadequate washing may alter the colours.
12
Limit exposure if possible If the metal parts
get wet or damp, dry them. To avoid the
risk of fire, do not leave the porduct close
to strong heat sources ( electric or gas
stoves). Clean the product with a damp cloth
or sponge with a mild detergent. Don't use
abrasive products. Do not bleach.
MATERIALS
Lining:
100% polyester
Plastic:
polypropylene
Tube:
steel
SIZES
Open:
L: 48.7 cm; H: 43.7 cm; P: 37 cm.
Close:
L: 32 cm; H: 11.3 cm; P: 37 cm.
WARNING
• WARNINGS!
Failure to follow these
warnings and the assembly instructions
could result in serious injury or death.
•
Please save owner's manual for future
use.
•
Adult assemble required.
•
Never leave the child unattended.
•
Always use the restraint system and
ensure it is correctly fitted.
•
Always use the chair attachment system
and ensure it is correctly fitted before
use.
•
Always check the security and the
stability of the product on the adult chair
before use.
•
Do not use this product on stools or
benches.
•
This product is intended for children able
to sit up unaided (minimum 6 months)
and up to 3 years or a maximum weight
of 15 kg.
•
Ensure that the adult chair with the chair
booster seat is placed in a position where
the child is not able to use its feet to push
against the table or any other structure
as this can cause the tip over of the adult
chair supporting the chair booster seat.
•
Do not use if any part is broken,
•
torn or missing.
•
Do not use accessories or replacement
parts other those approved by the
manufacturer.
•
When it is not used, the the chair booster
seat must be kept away from the reach
of children.
FOR TECHNICAL OR COMMERCIAL REASONS,
PRG RESERVES THE RIGHT, AT ANY TIME
AND ALSO ONLY IN A SPECIFIC COUNTRY,TO
MODIFY THE TECHNICAL CHARACTERISTICS
O F T H E M O D E LS D E S C R I B E D I N T H I S
LEAFLET, AND/OR THE SHAPE, TYPE AND
NUMBER OF THE ACCESSORIES SUPPLIED.
13