Publicidad
Idiomas disponibles
Idiomas disponibles
UNDER / ON-TABLE MOUNTING
There are two recesses on the top and bottom of the enclosure, each with two M3 threaded
holes, for mounting underneath or on top of the table. Screw the two enclosed mounting plates
to the top or bottom using the enclosed M3 countersunk screws. Now the amplifier can be fixed
in the desired position (see illustration, fixing screws not included). For tabletop mounting, the
four rubber feet must be removed beforehand.
CARE, MAINTENANCE AND REPAIR
To ensure the proper functioning of the unit in the long term, it must be cared for regularly and
serviced as required. The need for care and maintenance depends on the intensity of use and
the environment.
We generally recommend a visual inspection before each start-up. Furthermore, we recommend
that you carry out all the maintenance measures listed below every 500 operating hours or, in
the case of low intensity of use, after one year at the latest. Defects caused by inadequate care
may result in limitations of the warranty claims.
CARE (CAN BE CARRIED OUT BY THE USER)
WARNING! Before carrying out any maintenance work, disconnect the power supply
and, if possible, all appliance connections.
NOTE! Improper care can lead to impairment or even destruction of the unit.
1. Housing surfaces must be cleaned with a clean, damp cloth. Make sure that no moisture can
penetrate the unit.
2. Air inlets and outlets must be regularly cleaned of dust and dirt. If compressed air is used,
make sure that damage to the unit is prevented (e.g. fans must be blocked in this case).
3. Cables and plug contacts must be cleaned regularly and freed from dust and dirt.
20
Publicidad
