Vitesy Shelfy Manual Del Usuario página 21

DEVICE BATTERY INFORMATION
-> The device should be recharged only through a power supply with a
Class 2 or LPS output
-> Recommended power supply output voltage: 5.0V rated, 5.5 V max
-> Charging current consumption: 2.5 A max
-> Battery voltage: 3.6 V rated 4.2 V max
-> Battery capacity: 10400 mAh rated
-> Use only with battery model INB3.6-104E2 (3.6V, 10.4 Ah) from
Guangdong Superpack Technology Co., Ltd.
BATTERY REPLACEMENT DIRECTIONS:
Contact Vitesy support at support@vitesy.com, to purchase the new
battery and for complete battery replacement instructions.
Quick instructions:
1. Manually remove the back shell containing the filter from the main
body.
2. Lift off the 4 screw cover caps by manually helping yourself with a
flathead screwdriver, taking care not to scratch the plastic.
3. Unscrew the 4 screws (part number STP320300120) with an H1
Phillips screwdriver.
4. Lift up the plastic shell, place it to the side paying attention to the
wiring and disconnect the battery connector.
Take out the battery and follow the instructions in the DISPOSAL
5.
INFORMATION REGARDING THE ELECTRICAL PART OF THE
PRODUCT section for proper disposal.
6. Take the new battery INB3.6-104E2, 3.6 V 10.4 Ah and place it in
the prepared compartment taking care to position it with the cable
toward the connector side.
7. Route the cable through the provided slot.
8. Insert the connector and reassemble the shell.
9. Tighten the 4 screws until you make sure the two shells are
perfectly aligned.
21