Concerns On Installation - MS TECHNO FIX Manual De Instrucciones

CONCERNS ON INSTALLATION

(Below requirements must be met for
· Only suitable if the approved vehicles are fitted
with 3 point safety-belts, approved to UN/ECE
Regulation No. 16 or other equivalent standards.
· DO NOT install this Car seat on vehicle seats with
2-Point Retractor Safety Belts.
· This Car seat is only suitable for vehicle seats with
3-Point Retractor Safety Belts.
UNIVERSAL INSTALLATION POSITION
Front
Rear
WARNING
correct installation)
Please refer to the car manual if any further inqui-
ries about the car seat position.
DO NOT install this car seat
on the front vehicle seats
this car seat must be insta-
lled on the rear vehicle seat.
the centre rear seat must be
equipped with 3-point safety
belts
DO NOT install this car seat
on vehicle seats that face
sideward or rearward with
respect to the moving direc-
tion of the vehicle.
NO
SI
35 35