Trafimet ERGOPLUS 240 Manual De Istrucciones página 8

EN OPERATING AND MAINTENANCE MANUAL
OPERATION
Important information about safe operation of the MIG welding torch. Rating of electrical controls
included in the torch: 32VDC 0.05A.
Cooling unit power for water-cooled torches: Minimum 800W.
Before using the torch, ensure that all the cables are in serviceable condition and that the connectors are
correctly fastened.
How to connect the torch
Connect the torch to your welding equipment.
Secure the connector in place by turning the collar
clockwise.
Make sure to connect the coolant hoses to the correct hose connectors. If the connections cross, the
welding torch may overheat.
All trademarks are the property of their respective owners. The information and images are indicative and may be subject to change at any time without notice. © 2023 Trafimet Group SpA
Connect the coolant inlet and outlet hose to your welding
equipment.
Note that the connectors are color-coded.