MAJORITY OAKINGTON Manual De Instrucciones página 16

FM RADIO
EN
Press the 'Mode' button (Ref.7) multiple times on the unit to switch to DAB/DAB+
Radio. To select the mode from the remote press the 'FM/DAB' button (Ref.22). The
first time you switch to FM mode, the FM frequency "87.5 MHz" will be displayed on
the screen.
Fully extend the antenna (Ref.14) to ensure that the best signal is being received
before scanning for available stations.
To auto-scan for available stations with good signal, press the 'INTRO/AMS'
(Automatic Music Scan) button (Ref.24) on the remote control for the radio to begin
scanning up the frequency band. The next available station with good signal will then
begin to play.
To tune a specific frequency manually
To listen to a specific frequency, press and hold the 'Next' button (Ref.46) on the
remote to search forwards quickly, or press and hold the 'Previous' button (Ref.31) to
search backwards quickly. It will stop searching when the button is released.
To search slowly through the frequencies, press the 'Next' (Ref.46) or 'Previous'
buttons (Ref.31) on the remote multiple times rather than holding them.
Select a Stored Station using the Remote
To select a stored station using the remote control, use the number buttons (Ref.36)
to key in the preset number of the station you wish to listen to, followed by the Enter/
Play/Pause button (Ref.47). For example, to select Preset Station number 1, key in
'01' followed by the Enter button, and to select Preset Station number 11, key in '11'
followed by pressing the Enter button (Ref.47). You can also change the station using
the buttons on the front of the unit (Ref.5)/(Ref.6).
16