Partyspace Flexxum SET1515PVCL Manual De Instrucciones página 7

YOU DON'T FEEL LIKE READING?
Watch our instructional video instead.
Scan here and see how it's done.
EN 13
SETTING UP THE TENT
1. With two people, hold the centre of the scissor element on the short side of the f rame and
walk further backwards. Pull the tent fully open. With the larger sizes (3 x 6, 4 x 6 and 4 x
8) it can sometimes be slightly more diff icult to click the roof f rame together. In that case,
it is advisable to push the tent upwards beneath the central pole(s).
2. Place your foot on the baseplate and push the roof f rame for each leg up until it clicks into
place.
3. Push the tension straps on the inside of the roof through the square opening and secure
them. Tension the straps tightly.
4. With two people, lift one side of the tent up and pull on the pin near the bottom of the legs.
Slide the legs out until you hear a click. Do this either on one short side or one long side of
the tent, but never with two diagonally opposite legs.
5. Repeat step 4 on the other side of the tent.
1.
3.
FLEXXUM - MANUAL
2.
4.