Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION - General
The appliance is intended only for domestic use, not for professional use.
The following description is associated with the image on page 2:
1. Thermostat
2. Pan
3. Glass lid
4. Knob
BEFORE FIRST USE - Cleaning
1. Remove all packaging material.
2. Clean the appliance before using the appliance for the first time (see 'Cleaning and maintenance').
ATTENTION:
•
The appliance may emit a little smoke and a characteristic smell when you switch it on for the first time.
This is normal and will stop on its own. Make sure the appliance has sufficient ventilation.
•
Keep house birds away from the appliance when it is in use. Fumes released from the non-stick coating
are harmful to birds.
BEFORE FIRST USE - Assembling
Assemble the glass lid and knob as follows:
OPERATION - Preheating
1. Put the appliance on a level and heat-resistant surface.
2. Insert the thermostat fully into the socket
ATTENTION:
•
Only the supplied cable with thermostat may be used.
3. Put the plug in the wall socket.
4. Adjust the thermostat dial to the required temperature:
1 = approx. 115°C
2 = approx. 155°C
3 = approx. 175°C
4 = approx. 185°C
5 = approx. 220°C
ATTENTION:
•
The indicator light on the thermostat will illuminate to show that the heating element has been switched
on.
5. After a few minutes the indicator light will go out. Once the indicator light has extinguished the appliance
has reached the required temperature, and is ready for use.
ATTENTION:
•
During use the heating element will switch on and off to keep the temperature of the pan constant.
Consequently the indicator light will also occasionally be illuminated.
5. Grips
6. Tempura rack
7. Bamboo spatula
13
5
EN
Publicidad
