Publicidad
Idiomas disponibles
Idiomas disponibles
3. Instructions for Use
A. Before using
Wiring: Transmitter connects to power source via adapter. Charging
base connects to transmitter via Type-C cable.
The pager is placed on the charging base. The charging indicator on
the pager lights up to indicate normal status.
Charging Indicator Information:
- Flashing = Charging
- Always On = Full Charged
B. Operating Instruction
CALL mode is the default mode. Continuously press Delete button
(←) to return Call Mode while in other mode. C--- is displayed in
CALL mode.
Input the number and press CALL button to call the corresponding
pager.
C. Programming (F1)
All pagers are programmed before delivery. So this operation is only
necessary when adding new pagers or changing numbers.
Press FUNCTION, F1 is displayed. Then press CALL to enter pro-
gramming status.
In programming status, P--- is displayed. Charging indicator on
charging pagers will be off, and other LED will be on.
Input the number, and all charging pagers display the number. Then
pick up a pager, and it beeps to indicate the number has been ac-
cepted.
Repeat above steps to program other pagers.
Note: The pagers will quit programming mode if no operation within 1
minute. All pagers' numbers will not change if not being programmed.
1 pager only can be programmed 1 number. Old number will be re-
placed by the new one.
Publicidad
