BGS technic 74359 Manual De Instrucciones página 4

USE
•
Place the tool (A) onto the hex of the coolant pump drive pulley.
•
Place the new water pump drive belt (C) on the tool's spigot (B).
•
Using the crankshaft pulley hex bolt, turn the coolant pump drive pulley while guiding the drive
belt by pressing (D).
•
Remove the tool and check the correct alignment of the new drive belt.
NOTES
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed