LATICRETE LATAPOXY 310 Manual De Instrucciones página 6

Ocultar thumbs Ver también para LATAPOXY 310:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4.
STARTING AND STOPPING
Once the cartridge has been loaded simply press the power trigger to begin dispensing.
5.
SPEED AND DOSE CONTROL
Speed and Dose can both be adjusted with the corresponding dials on the side of the tool.
Both dials have an "off" position when spun all of the way to right. For the dose this
disables the dose function and allows the tool to run indefinitely while trigger is pulled.
When the speed dial is in the "off" position the tool is completely disabled and will not run.
NOTE – To minimize the chance of damage to the cartridge, the dispenser automatically adjusts its output force. You may experience a variation in motor speed associated with this
function. If damage or blowby occur, adjust the speed control to a lower setting.
These accessories are recommended for use with the LATAPOXY
BATTERY:
20 Volt Lithium-Ion Battery 1P 2.0A-h (Part number 1010-018)
n
CHARGER:
120 Volt AC Charger North America and Japan (Part number 1020-029-US)
n
220 Volt AC Charger for European Union (Part number 1020-029-EU)
n
Contact LATICRETE Technical Services at 800.243.4788, ext. 1235 with any questions regarding tool operation or problems.
Contact LATICRETE Customer Service at 800.243.4788, ext. 1219 for information on spare parts and accessories.
THE WARRANTY IS NULL AND VOID IF THE TOOL HAS BEEN OPENED OR TAMPERED WITH BY ANYONE OTHER THAN THE DESIGNATED FACTORY SERVICE CENTER.
LATICRETE International, Inc. warrants the LATAPOXY
period of one (1) year from the date of purchase subject to the terms and condition stated in Data Sheet 230.13 LATICRETE
This warranty does not cover the following: 1) abuse to tool; 2) failure to properly maintain and clean tool; 3) any modification made to the tool; 4) any failure incurred as a result of
misuse or use for which the tool in non intended for; 5) normal wear and tear; 6) any repairs made to the Cordless Mixer by an unauthorized representative; 7) failure due to improper
loading and or improper tool set up; failure due to usage of material other than LATAPOXY 310 Stone Adhesive.
FIGURE 4
ACCESSORIES
310 Cordless Mixer:
®
220 Volt AC Charger for United Kingdom (Part number 1020-029-UK)
n
220 Volt AC Charger for Australia (Part number 1020-029-AU)
n
FACTORY SERVICE CENTER
WARRANTY
310 Cordless Mixer is free from manufacturing defects and will not break down, deteriorate or disintegrate under normal usage for a
®
FIGURE 5
Product Warranty.
®
6

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido