Operation; Live Cast - Abus TVAC80020B Manual De Instrucciones

6. Operation

To switch the monitor ON / OFF, press and hold the power button for at least 2 seconds.
After each start, the monitor will switch to the live cast, selecting the last viewing settings.
If the symbol is displayed, then the SD card was identified correctly by the monitor and is functioning
properly.

6.1 Live cast

Signal display
Display "Visitor is being recorded"
Battery status display for door station
Yellow:
Red:
Recording display: Flashes during recording
No SD card inserted
Full SD
SD card full
Err SD
SD card is not detected
SD card blocked
SD card will be overwritten when memory is full
SD card display
SD card memory capacity
NO SIGNAL
No connection between the door station and monitor
Speech function
01:12:45
Recording time
2011 05 01
Date / time display
14:30:11
Battery charged
Battery low
14
English