Publicidad
Z\ SAFETY INSTRUCTIONS
READ AND SAVE THESE
INSTRUCTIONS.
This appliance conforms to the relevant
safety regulations.
Repairs should only be carried out by
qualified specialists.
Improperly executed repairs can give rise to
significant hazards for the user.
Your new appliance was protected on its
way to you by the packaging. None of the
materials cause pollution to the environ-
ment and all can be recycled for use again.
Please help to protect the environment and
dispose of the packaging in an environ-
ment-friendly manner.
You can obtain information about the best
method disposing of old appliances and
packaging from your dealer or local
municipal council.
Check whether this fan may be combined
with the extractor hood.
A
SAFETY WARNING:
Before servicing
or cleaning unit, switch power off at the
service panel and lock service
disconnecting means to prevent power
from being switched on accidentally.
When the service disconnecting means
cannot be locked, attach a tag to the
service panel to indicate power has been
switched off for maintenance.
Z\ WARNING - to reduce the risk of fire,
electric shock, or injury to persons, observe
the following:
A.
Installation work and electrical wiring
must be done by qualified person(s) in
accordance with all applicable codes
and standards, including fire-related
construction.
B.
Sufficient air is needed for proper
combustion and exhausting of gases
through the flue (chimney) of fuel
burning equipment to prevent back
drafting. Follow the heating equipment
manufacturers guideline and safety
standards such as those published by
the National Fire Protection Association
(NFPA), and the American Society for
Heating, Refrigeration and Air
Conditioning Engineers (ASHRAE), and
the local code authorities.
ZX
CAUTION - For General Ventilating Use
Only. Do Not Use To Exhaust Hazardous Or
Explosive Materials And Vapours.
A
This unit must be grounded.
Z\ WARNING: To reduce the risk of fire or
electric shock, do not use this fan with any
solid-state speed control device.
PRIOR TO INSTALLATION
The fan is intended to be installed in the
HMCN36FS/HMCN42FS
hood only.
A
WARNING: The hood must be placed
ona stable surface when installing the fan
We reserve the right to construction
changes within the context of technical
development.
Publicidad
