Tenda CT6-WCAV2.0 Manual De Instrucciones página 8

Install the camera
Tips
- Make sure the ceiling is strong enough to withstand three times the weight of the camera.
- You may need a hammer drill, a drill bit (Diameter: 6 mm), a screwdriver, and a ladder for the installation.
Ceiling/wall mounting
1 . Place the template at the desired location.
2. Drill screw holes and insert anchors into them. (Drill bit diameter: 6 mm; Hole depth: 28-32 mm)
3. Fix the bracket (if any) to the desired location.
4. Fix the camera using the screws.
Pole mounting
You can use this method if the bracket is provided.
1 . Pass the strap (self-prepared) through the holes in the bracket, and secure the bracket to the pole.
2. Fix the camera using the screws.
Adjust the monitoring angle
Loosen the orientation knob (if any), adjust the orientation of the camera as required, then tighten the
knob.
03