NGP SLSS1-6 Instrucciones De Instalación página 4

6. Fit Door Guide to Floor
Mark for position of door guide.
Check post fasteners for tightness.
Mount door guide to floor with anchors
and 2 ST4.2x25 screws.
x1
K Ø8 (x2)
7. Hang Door
Route bottom of door to receive floor mounted guide
as shown. Lift door onto track. Make adjustments to
hanger so that door is plumb.
8. Adjust Stops
Adjust stops accordingly. Tighten set screw
with sufficient force to drive set screw into
bar after final adjustment.
x1
L
Options:
• Cut track to net length
• Wall Mounted Guide
• Bottom Channel Guide (Requires
3/8" x 7/8" route in door bottom)
(x2)
ST4.2x25
(x1)
4mm
H
Ø8
1-3/16"(30)
1-3/16"(30)
8
Ø
8
Ø
1/4"
(6.35)
3/8
3/16"(4)