Descargar Imprimir esta página

Bresser MyTime iO NX Manual De Instrucciones página 7

Reloj de pared radio controlado con medición de temperatura y humedad

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

ABOUT THIS INSTRUCTION MANUAL
These operating instructions are to be consid-
ered a component of the device. Please read
the safety instructions and the operating instruc-
tions carefully before use. Keep these instructions
for renewed use at a later date. When the device is
sold or given to someone else, the instruction man-
ual must be provided to the new owner/user of the
product.
This product is intended only for private use.
GENERAL WARNINGS
CHOKING HAZARD!
Keep packaging material, like plastic bags and rub-
ber bands, out of the reach of children, as these
materials pose a choking hazard.
RISK of ELECTRIC SHOCK!
This device contains electronic components that op-
erate via a power source (batteries). Children should
only use the device under adult supervision. Only use
the device as described in the manual; otherwise,
you run the risk of an electric shock.
RISK of FIRE/EXPLOSION!
Do not expose the device to high temperatures. Use
only the recommended batteries. Do not short-cir-
cuit the device or batteries, or throw them into a fire.
Excessive heat or improper handling could trigger a
short-circuit, a fire or an explosion!
NOTE!
Do not immerse the unit in water.
Do not subject the unit to excessive force, shock,
dust, extreme temperature or high humidity, which
may result in malfunction, shorter electronic life
span, damaged batteries and distorted parts.
Do not disassemble the device. In the event of a de-
fect, please contact your dealer. The dealer will con-
tact the Service Centre and can send the device in to
be repaired, if necessary.
Use only the recommended batteries. Always re-
place weak or empty batteries with a new, complete
set of batteries at full capacity. Do not use batteries
from different brands or with different capacities.
Remove the batteries from the unit if it has not been
used for a long time.
The manufacturer is not liable for damage related
to improperly installed batteries!
GENERAL INFORMATION
This item is available in the following variants. The
functions and technical data are the same for all
models. They only differ in the colour of the dial
plate.
8020211 B4K000:
green
8020211 CM3000:
black
8020211 E8G000:
red
8020211 GYE000:
white
8020211 MGU000: anthracite
8020211 SX9000:
sky blue
8020211 URJ000:
purple
8020211 WXH000: blue
SCOPE OF DELIVERY
Wall clock (A), Remote sensor (B), Instruction man-
ual
Required batteries: 3 x 1.5V battery (Size AA/LR6)
and 2 x 1.5V battery (Size AAA/LR03)
Batteries not included with purchase.
PARTS OVERVIEW
Wall clock (Fig. 2)
A. Locking pin
1. Dial plate
2. Clock hands (hours, minutes, seconds)
3. Humidity display (indoor)
4. Temperature display (indoor)
5. Temperature display (outdoor)
6. Wall mount
7. Battery compartment 1 (Clock)
8. Battery compartment 2 (Temp. and humidity
display)
9. M.SET button
10. RESET button
11. REC button
12. °C/°F/DOWN button
13. CH/UP button
Remote sensor (Fig. 3)
14. Function light
15. Wall mount
16. Battery compartment
17. Table stand (fold-out)
GETTING STARTED/POWER SUPPLY
NOTE!
Note the right order before operating the device
for the first time or when replacing the batteries.
Make sure to place the batteries strictly according
(Fig. 1)
DE
GB
FR
IT
ES
7

Publicidad

loading