Publicidad
Idiomas disponibles
Idiomas disponibles
Speed selection chart*
Dial Setting
Approx. RPM
1
16000
2
18300
3
20600
4
22900
5
25200
6
27500
7
30000
*The speeds in this chart are approximate and are for
reference only. Your router may not exactly produce the speed
listed for the dial setting.
Maintenance
Your STANLEY tool has been designed to operate over a long
period of time with a minimum of maintenance. continuous
satisfactory operation depends upon proper tool care and
regular cleaning.
Warning! To minimize the danger of serious
@
personal injury, please switch off the tool power and
disconnect all plugs/remove battery before adjusting
or removing/ installing any accessory. Before
reassembling the tool, press and release the trigger
switch to make sure the tool is already switched off.
C
Lubrication
STANLEY tools are properly lubricated at the factory and are
ready for use.
Tools should be lubricated regularly every year depending on
usage. (Tools used on heavy duty jobs and tools exposed to
heat may require more frequent lubrication.)
This lubrication should be attempted only by trained power
tool repairperson's such as those at STANLEY service centers
or in other qualifi ed service personnel.
D
Cleaning
Warning! Regularly clean the ventilation slots in your
@
tool using a soft brush or dry cloth.
Warning! Never use solvents or harsh chemicals to
@
clean non-metal parts of the tool. These chemicals
may weaken the material of the parts. Use only mild
soap and damp cloth to clean the tool. Never let any
liquid get inside the tool; never immerse any part of
the tool into liquid.
IMPORTANT! To ensure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those listed
in this manual) should be performed by authorized service
centers or other qualifi ed organizations, always using identical
replacement parts. Unit contains no user service able parts
inside.
Application
Large diameter bits and cutters
Small diameter bits and cutters.
Softwoods, plastics, laminates.
(Original instructions)
Optional Accessories
Warning! Since accessories, other than those offered by
STANLEY, have not been tested with this product, use of
such accessories with this tool could be hazardous. To reduce
the risk of injury, only STANLEY, recommended accessories
should be used with this product. The performance of any
power tool is dependent upon the accessory used. STANLEY
accessories are engineered to high quality standards and are
designed to enhance the performance of power tool.
By using STANLEY accessories will ensure that you get the
very best from your STANLEY tool.
STANLEY offers a large selection of accessories available at
our local dealer or authorized service center at extra cost.
Protecting the environment
Separate collection. Products and batteries
marked with this symbol must not be disposed of
Z
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries according
to local provisions. Further information is available at
www.2helpU.com
ENGLISH
29
Publicidad
